UniFi Video 3.2.0 Beta 版本已发行及变更日志


#1

我们这一版本的发行,开始支持控制器映射到 UBNT 云端服务器上,用于像 UniFi 云访问一样的远程访问。访问需要有 UBNT 论坛帐户支持(http://community.ubnt.com/
注意:该版本目前为测试版本,不建议用在正式项目中。

系统需求


  • NVR appliance or a 64-bit OS from the Files section below
  • Intel Atom D2500 CPU
  • 100 GB HDD
  • 2 GB RAM
  • Google Chrome

Recommended

  • 500 GB HDD
  • 4 GB RAM

重要提醒:

  • Do not install this Beta release in a mission-critical or production environment.
  • All Linux commands below are for the NVR appliance and Debian 7. Different Linux distributions will have slightly different commands.
  • airCam (gen1) cameras are not supported in 3.2.
  • Updating from a previous UniFi Video installation might take an hour or longer, depending on the amount of recordings in the database. To get up and running immediately, perform a clean install instead of upgrading.
  • Your Ubiquiti Account (SSO) is the same account you use to login to the community forum. If you want to use a different account for UniFi Video, first log out of the community before setting up UniFi Video for cloud access.

安装:

  • Windows: Run Installer as Administrator
  • Linux: sudo dpkg -i unifi-video_3.2.0-beta-Debian7_amd64.deb

映射到云端设置(远程访问)
New Installations

  • Visit https://video.ubnt.com using Chrome from a computer on the same network as your UniFi Video installation.

Upgrades

  • Connect to your NVR locally (over HTTPS using the server’s IP address on port 7443), then click ‘Connect To My Ubiquiti Account’ under NVR Settings.

变更日志

Controller

  • Cloud Login support (SSO)*
  • No more messing with firewall port exceptions!
  • Added invitations for additional SSO accounts
  • Fixed motion zone testing
  • Fixed API token handling for non-admin users
  • Database optimizations
  • Fixed disk statistics
  • Fixed issue where temp files weren’t being cleaned up properly
  • Fixed issue setting controller host
  • Added minimum motion trigger time
  • Added support for additional timezones
  • Any managed cameras will be updated to use the Master Camera Password. You can change the Master Camera Password under NVR Settings.
  • Mobile app latency reduced dramatically

Web UI

  • No more Flash!
  • Timeline feature added
  • Ability to create “Advanced” Live Views to cycle cameras when motion is detected, or on a time interval
  • Ethernet and WiFi link state indicators added
  • Digital zoom and panning added
  • Variable playback speed in Timeline and Recordings
  • Mute state now persists when closing/opening new recordings and on live feeds
  • Fixed UI issue when NVR is upgrading
  • Fixed Edit Map modal to display image map preview

Firmware

  • Updated Web UI
  • UniFi Video Cameras can now be configured in “Standalone” mode with native RTSP streaming
  • Image settings can be configured from camera Web UI
  • Microphone can now be disabled.
  • Low Resolution now truly 16/9. Resolution changed to 640 x 360 (from 640 x 368)
  • Medium resolution is still 720x400 (not true 16/9). Due to camera limitations, we are unable to fix this.

已知问题

  • When adding a new camera, your camera password will be reset and configurable under NVR Settings. Username remains the same.

端口转发

If not using Cloud login, forward the following ports (TCP) if accessing over WAN:
Between Camera & NVR

  • 22 - SSH
  • 6666 - Live FLV for incoming Gen2 camera streams
  • 7080 - WebSockets/HTTP
  • 7443 - WebSockets/HTTPS

Between Client & NVR

  • 7080 - HTTP web UI & API
  • 7443 - HTTPS web UI & API
  • 7445 - Video over HTTP
  • 7446 - Video over HTTPS
  • 7447 - RTSP re-streaming via Controller

自定义端口

  • To change port values, locatesystem.properties in the following directory:

  • Windows: C:\ProgramData\unifi-video\data

  • Linux: /usr/lib/unifi-video/data

  • Open system.properties with a text editor.

  • Uncomment the desired keys by deleting the number sign (#), then change the port number.# unifi-video v3.2.0app.controller.id=…app.controller.mode=masterapp.systemName=myNVRis_default=falsetimezone=America/Chicagouuid=…# app.http.port = 7080# app.https.port = 7443# ems.liveflv.port = 6666# ems.rtmp.port = 1935# ems.rtsp.port = 7447

  • Save and close system.properties.

  • Restart the UniFi Video service.

  • Windows: via System Tray/Notification Area icon

  • Linux:sudo /etc/init.d/unifi-video restart

下载链接:

*Cloud functionality is peer-to-peer. All video is encrypted and not stored on our servers.


如何利用 UBNT 云平台管理 NVR 并远程访问你本地的 UVC 摄像头