airOS v5.6.3 正式版本发行及变更记录


#1

Hi all,

最新的airOS 5.6.3已经正式发行,你可以通过以下链接进行下载:
http://www.ubnt.com.cn/download/

AirOS V Firmware Revision History

====================================================================

Supported products

  • Bullet M2/M5/Titanium

  • Rocket M2/M2 Titanium/M3/M365/M900/M5/M5 GPS/M5 Titanium/M6

  • NanoStation M2/M3/M365/M5/M6

  • NanoStation Loco M2/M900/M5

  • NanoBridge M2/M3/M365/M900/M5

  • AirGrid M2/M5/HP/HP New

  • PowerBridge M3/M365/M5/M10

  • LiteBeam M5

  • PicoStation M2

  • AirRouter/HP

  • PowerAP N

====================================================================

Version 5.6.3-Service release (November 30, 2015)


Regulatory updates:

  • New: Enable UNII2 band after Revised UNII Rules activation for certified models (United States/Puerto Rico)

  • New: Revised UNII Rules activation for certified models:

    Rocket M5

    NanoBridge M5

    PowerBeamM5 300/400/620

    NanoBeam M5 16/19

  • Fix: Revised UK/DFS rules

  • Fix: Disabled UNII2 frequencies for AP-Repeater after Revised UNII Rules gets activated (FCC regulatory restrictions)

  • Fix: Limit channel width to 20MHz for Indonesia

  • Fix: Reduce EIRP for Pakistant to 20dBm/100mW (5GHz)

Improvements:

  • New: Linux kernel upgrade to 2.6.32.68 (possible fix for random AP reboots)

  • New: DHCP server IP range is suggested according LAN IP address/netmask values

  • New: Antenna model selection in Wireless page

  • New: Allow to disable remote statistics reporting via Extra Reporting option in Advanced configuration page

  • New: Default password change request before applying configuration changes

Fixes:

  • airMAX: Security improvements

  • Fix: Generate SSL certificate start date from firmware build timestamp

  • Fix: Network settings are not fully loaded in case if bridge section is missing in configuration file

  • Fix: AP crash prevention in power save mode

  • Fix: Incorrect antenna selection for Rocket M900

  • Fix: DFS AP doesn’t change channel after NOL timeout

  • Fix: Don’t require to change default password if configuration backup was uploaded with updated credentials

  • Fix: Egress traffic is limited on VLAN interfaces when rules are set on parent

  • Fix: Simplified airView tool launch

  • Fix: Enable airView for LiteBeam M5 23

  • Fix: Optimise remote statistics collection to reduce infctld CPU usage

  • Fix: Improve frequency scan for XW series radios

  • Fix: PHP2 buffer overflow

  • Fix: Station doesn’t connect back to AP after it was kicked or AP was rebooted

  • Fix: Reduce remote statistics bursts from AP and randomise transmit interval

  • Fix: Remove Station only and airMAX only restriction for LiteBeam M5 23 product

  • Fix: Improve AC2 agent response to server after device reboot

  • Fix: Wrong frequency list after session timeout

  • Fix: Respond on wireless interface for discovery requests when PPPoE client is configured

  • Fix: Validate overlapping 30MHz width channels

  • Fix: Enabling “Hide Indoor Channels” cause station to lockup

  • Fix: wpa_supplicant no timestamp check

  • WEB UI: Translations update

  • WEB UI: Device Name displaying incorrectly when using symbol &

  • WEB UI: Show possible LAN negotiation speed for gigabit capable devices

  • WEB UI: TX Power reporting in MAIN page when set 0dBm

  • WEB UI: Show antenna gain input field for devices which have single antenna option and no built-in antenna

  • WEB UI: Show correct antenna in main tab if there are two antennas with same gain value

  • WEB UI: Move Refresh button to top of the Stations list

  • WEB UI: Hide TX signal in Station list if remote statistics are disabled

  • WEB UI: TX power slide doesn’t allow dragging


#2

LBE-M5-23默认版本是V5.6.2只能使用station模式,升级到V5.6.3以后可以使用AP和AP-repeater模式


#3

更新包。


#4

XW.v5.6.3.28591.151130.1735.bin里中文化不完全,而且怀疑是机翻,部分内容很无语,很多帮助信息是英文,还有个错别字:在network页,网关翻译成网管。
ubnt产品很好,希望能够完善本地化内容。